Traxxas TXC-4M Extreme Crawler 1/18 4WD 3S Brushless RTR RC Crawler

The Traxxas TXC-4M Extreme Crawler is a 1/18 scale, 4WD Ready-To-Drive rock crawler built on a molded monocoque chassis with 3S brushless power. Portal axles, a 60° steering angle and 1.3 in Stone Claw beadlock tires are set up for technical rock lines. It comes fully assembled with a 3-cell LiPo battery and USB charger, for hobbyists who want competition-style crawling in a compact size.

Key Features

• Molded monocoque chassis: single-piece composite design, more torsional rigidity and less weight than a conventional ladder frame, battery and ESC mounted low on opposite sides for weight distribution, integrated rock light mounting and wire routing
• 3S brushless electronic speed control: precise throttle control, LiPo overvoltage protection, two-stage low-voltage detection, three drive profiles (Sport, Trail, Crawl), 6-volt BEC
• 3S brushless outrunner motor: 3350 Kv, more torque and low-speed control than conventional designs, laser-etched motor can
• TQ Compact 2.4 GHz 2-channel radio: removable color-matched grip adapter, high-output signal for long range, compact receiver with servo and LED channels
• Clipless tube-frame body: lightweight tube frame, interior with driver figure, hidden clipless latch at the rear, mounting bosses for accessory light kits and optional accessory panels (sold separately)
• Driveline: full-time shaft-driven 4WD, locked axles with steel spool gears, steel axle shafts and U-joints, 25% overdrive front axle, heavy-duty CV center driveshafts, single-speed transmission with all-metal gears and full ball bearings
• Portal axles: more center ground clearance, reduced torque twist, all-metal gears, full ball bearings
• Suspension: lay-down shock layout, triangulated 4-link front and rear, high-clearance lower links
• Steering: 60° steering angle, waterproof 2265 servo with full metal gears and 75 oz-in of torque, aluminum center section, horizontal servo mounting, high-throw metal servo horn, high-clearance drag link, direct steering (no servo saver)
• Oil-filled aluminum GTM Pro shocks: anodized aluminum bodies, body-over-shock look, O-ring sealed with smooth damping, rebuild kits available
• Wheels and tires: 1.3 in licensed Method Race Wheels in a 3-piece beadlock design, 7 mm hex, 1.3 x 2.8 in Stone Claw tires with high-grip compound, stepped-block tread and wide directional sipes
• Sealed ball bearings and hex hardware throughout

In the Box

• TXC-4M Ready-To-Drive crawler
• Clipless tube-frame body
• 3S brushless power system
• TQ Compact 2.4 GHz transmitter
• 11.1 V 250 mAh 3-cell LiPo battery with iD
• USB charger with iD
• Maintenance tools

Required (Sold Separately)

• (4) AA alkaline batteries for the transmitter
• USB-A power source (2-amp, 5 V minimum recommended)

Specifications